The GTC Coating System is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a tough, woven polypropylene backing with a high tack butyl rubber adhesive. An additional layer of POLYKEN 980 or 955 should also be used on pipes larger than 12" diameter to improve the soil stress resistance of the system.
polypropylene bitumen tape,pp bitumen tape,PP Anti-corrosion Tape, Polypropylene Anti-corrosion Tape,Polypropylene Tape Jining Qiangke Pipe Anticorrosion Materials CO.,Ltd , https://www.pipe-wrap-tape.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>NTN opens a bearing that is equipped with a rotational sensor that is 40 times the resolution NTN opens a bearing that is equipped with a 40-fold rotating sensor
A look at the title is very shocking; with the progress of automation; the connection between the bearing and the automation is a development direction; NTN has new measures in this regard! /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
NTN and France's SNR jointly announced the rotation of the bearing to the maximum 40 times the original bearing "equipped with high-resolution rotary sensor bearing". The new product is used in colorful copiers and rotary control equipment; can achieve high precision; And can save energy.
SNR's sensors are line sensors equipped with multiple electromagnetic sensors on the IC. They use the same ring magnet and electromagnetic sensor as the original product; when the ring magnet rotates; the N and S poles are replaced in front of the electromagnetic sensor. What is different is the measurement method. The N-pole or S-pole of the original product will output a pulse every time it crosses horizontally; compared with the new product, the new product will measure the high-resolution rotation signal continuously between the pole and the pole.
The operation principle of the new product is the same as that of the bearing released by NTN in August 2007 (refer to the report of this site). Inside the line sensor; two sets of electromagnetic sensors are arranged side by side at intervals of 1/2 of the interval; it is assumed that the interval measured from the end of the N pole is θ; then the intensity of the magnetic force is sinusoidal with respect to θ. When the phase is shifted by 90°; the first group of sensors measure the sin wave; the second group of sensors measure the cos wave; the values ​​of sin and cos can be used to determine the polar sum. The orientation between the poles.
The IC scale is 6×7mm. Endian has used the bearing sensor device technology possessed by it; it has completed the miniaturization and high resolution of the bearing. The first batch is put into the ball bearing with an inner diameter of 15mm and an outer diameter of 35mm. The circle outputs up to 1280 products of the biphasic pulse signal (A; Phase B). That is to say; each output pulse corresponds to a rotation viewpoint of about 0.3°. It is also possible to distinguish the direction of rotation.
Recommend to friends comments close window Bearing related knowledge New plating process for anti-friction layer of sliding bearing (3)
What should be observed before the bearing of the device? Common terms of the bearing (1)
Summary of the NSK bearing rear code name (1)
The linear meaning of linear bearing LM and LME code
This article links to http://
Please indicate the bearing network http://
Previous:What are the methods and parameters of the slewing bearing? The next part: the selection of rolling bearings
NTN opens a bearing that is equipped with a 40-fold rotating sensor
Source: China Bearing Network Time: 2017-11-29