When installing a light steel keel partition wall, several key points should be carefully considered to ensure structural integrity and durability. First, the top and bottom tracks (also known as the ceiling and floor channels) must be properly positioned and secured along the ceiling and floor lines. Vertical studs should be placed in the vertical direction, and additional framing should be added around door openings. In the horizontal direction, cross members are essential for stability. Essential accessories include support clips, clip holders, corner brackets, connectors, and fasteners, all of which play a crucial role in the overall structure.
The top and bottom tracks should be fixed according to the marked elastic lines. Fastening methods such as nailing or using expansion bolts are common, with nails spaced no more than 600mm apart. For vertical studs that are adjacent to walls or columns, they can be secured using nails, expansion bolts, or wood screws, with spacing not exceeding 900mm. The middle vertical studs should be placed based on the panel width—typically no more than half the panel width plus a 5mm gap—and their spacing should not exceed 600mm. When two partition walls intersect, the vertical stud at the intersection must not be skipped.
Cross members can be attached using support clips, clip holders, or connectors. If needed, blind rivets may also be used, but electric welding should be avoided to prevent damage to the steel. The spacing between transverse members should not exceed 1200mm. A vertical stud must be placed at the joint between panels to maintain alignment and strength. It is important not to cut or reduce the cross-sectional size of any keel, as this could compromise the structure.
By following these guidelines, the light steel keel framework can meet all necessary requirements, helping to avoid quality issues caused by improper installation. During the construction process, regular inspections should be conducted, primarily through manual testing and visual checks to ensure everything is correctly aligned and securely fastened. FRP big-diameter pipe,FRP wide-diameter pipe,RP Pipework,FRP Small-scale Pipe,GRP Miniature Jacking Pipe Zhejiang Huafeng new material Co., Ltd. , https://www.cnhfpipe.com
Attention should be paid to the construction of light steel keel partition wall