Cleaning tools: softener, washing powder, feather duster, vacuum cleaner Operating procedure: Different curtains require different cleaning methods. For flannel curtains, it's important to dust them thoroughly. After removing the curtains, shake them by hand to let the surface dust fall off naturally. Then, prepare a detergent solution and soak the curtains in water for about 15 minutes. Suede curtains should be cleaned using a vacuum cleaner with strong suction power. When washing, it's best to shake them outside first to remove loose dust. Then, soak them in warm water mixed with detergent for around 15 minutes. Avoid twisting the fabric tightly, as this can cause pilling or damage. It's recommended to wash them gently by hand. After washing, place them on a slanted rack to drain water naturally, and avoid direct sunlight to prevent fading or warping. Additional tips: Always check the care label before washing any type of curtain. For delicate fabrics, consider using a gentle cycle on your washing machine if allowed. Never use bleach or harsh chemicals unless specified. Regular maintenance, such as dusting weekly, can help extend the life of your curtains and keep them looking fresh. By following these steps, you can ensure that your curtains remain clean and in good condition for longer. CNC machining is the main process for producing copper parts in many industries. Copper has good ductility, electrical conductivity and thermal conductivity, and various machined copper parts are widely used in various industries such as automotive, aerospace, medical and so on. And copper is one of the materials that are easy to machine. Brass cnc parts,cnc machine for brass parts,brass cnc turned parts,brass cnc machining,brass cnc,cnc machining brass Taizhou TS HARDWARE Co., Ltd , https://www.shuwengroup.com
Winter curtain cleaning tips