HIDEEP Provides A Wide Rang Of Distinctive bathroom accessoris With Unique Design To Meet Customers Individual Requirements.
1.Different Style For Your Choice. Including single bar, double bar, robe hook, soap dish, glass holder, towel shelf, tissue holder, toilet brush holder, shower basket, handle shower, Shower Head and so on.
2. High quality.
HIDEEP Product line
Product Information
Product description
bathroom accessoris
Brand name
HIDEEP
Material
Brass
Material analysis
Cu≥59%
Salt spray test
24 hours
Quality guarantee
5 Years quality guarantee
Application
For family bathroom, hotel bathroom and so on
Certification
ISO9001, CE
OEM and ODM
Acceptable
HIDEEP always invests heavily in R&D and speeds new products to marketing as it believed that an innovation strategy leads to betther new product performance.
Shower Set,Concealed Shower Set,Hidden Shower Mixer,Rain Shower Set Kaiping HIDEEP Sanitary Ware Co., Ltd. , http://www.hideep-faucet.com
2. When wiring, avoid wire connectors. Except for non-useable joints, the joints of the camera must be crimped or welded, and the wire connections and branches should not be subjected to mechanical forces. Wires that are empty in the tube must not have a connector under any circumstances. If necessary, place the connector on the junction box probe terminal as much as possible.
3. The wiring is installed horizontally or vertically in the building. Wiring should be protected by casing (plastic or iron pipe, optional according to the technical requirements of indoor piping), and the metal wire hose can be used for the ceiling wiring, but it must be fixed securely and beautifully.
4. The signal line must not be parallel to the high-power power line, and it must not be worn in the same pipe. If it is limited by the environment, you must keep away from more than 50cm in parallel.
5. The AC power supply of the alarm control box should be routed separately. The camera should not be put in the same pipe as the signal line and the low-voltage DC power cable. The installation of the AC power cable should meet the electrical installation standards.
6. The alarm control box to the ceiling of the wiring requirements of the jacket management into the wall or with iron pipes to protect, in order to improve the anti-theft system anti-theft performance.
7. There are two types of wire harnesses, clear and concealed. The camera tube requires horizontal and vertical, neat appearance. Dark piping requires short piping, smooth passage, and little elbow. 
Installation step diagram 
Installation step diagram
Graphic explanation security camera installation steps
1. The voltage of the monitoring camera wire should be greater than the working voltage of the line; the insulation of the wire should be in line with the installation method of the line and the environmental conditions for laying. The cross-sectional area of ​​the conductor should meet the requirements of power supply and mechanical strength.
(Man/Joan Technology)