Whether it is a medium-to-high-end car or an economical car, the principle is the same. It needs to be maintained on time. Only when it is properly maintained can the service life of agricultural trailers be extended, and the use of peace of mind can be avoided to avoid unsafe risks for themselves and others. The Traffic Safety Store Speed Bump and Speed Hump Buyers Guide
Cost effective, years of high performance with low maintenance
When to use a Speed Hump instead of a Speed Bump?
Whether it is a medium-to-high-end car or an economical car, the principle is the same. It needs to be maintained on time. Only when it is properly maintained can the service life of agricultural trailers be extended, and the use of peace of mind can be avoided to avoid unsafe risks for themselves and others. The safe use of vehicles should pay attention to "three-point repair, seven-point maintenance." Obviously, this is the consumer's awareness of the importance of daily maintenance of agricultural trailers.
First, always check the tire pressure with an agricultural trailer. Keep the tire pressure within the standard value range. Low tire pressure will increase vehicle fuel consumption, and the tire pressure that meets the specified requirements can reduce fuel consumption by 3.3 percentage points. Regularly replace the flatbed trailer oil, pay attention to cleaning the carbon deposits and the cleaner, and replace the spark plugs in time. To refuel at a regular gas station, select the appropriate fuel according to the compression ratio of the flatbed trailer. If the label is high or low, the cylinder and nozzle will increase carbon and shorten the service life. Try not to increase the power consumption in the car to avoid increasing the load on the generator. Avoid running weight, overspeed and low speed during the running-in period. Fuel-saving good driving habits not only reduce fuel consumption, but also extend the life of the vehicle. Therefore, learning to drive properly is very necessary. First, before going out, you should understand the road conditions and avoid more vehicles. If you want to reduce the load on the flatbed trailer as much as possible, avoid stepping on the throttle, sudden braking and rapid acceleration. Run the highway at an economic speed as far as possible, and avoid low-speed high-speed driving. See the red light to collect oil early, and use the method of not turning off the fire to block the sliding, and less on the brakes. As far as possible, the vehicle with manual transmission should change the gear in time after the vehicle speed is stable, avoiding long idle speed.
Wang Yuyan 15964518664
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Benefits Rubber Speed Bumps and Speed Humps over traditional asphalt or concrete bumps are:
100% recycled material
Never need painting
Easy one person installation
Removable for snow plowing or pavement maintenance
Speed Bumps are designed to:
Improve pedestrian safety
Reinforce stop signs in parking lots
Reduce the risk of accidents on private residential streets, driveways and parking lots
Speed bumps are specifically made to slow drivers down to between 2 to 5 mph.
Speed Humps are designed to:
Slow traffic on public roads such as schools, hospitals, anywhere reduced vehicle speeds are desired
Be gentle enough so that emergency vehicles do not need to slow down
Industrial areas or areas with heavy truck traffic where high speeds can lead to an overturned vehicle
Speed humps are specifically designed to slow vehicles to between 10 to 15 mph.
Rubber Speed Breakers,Rubber Speed Bumps,Portable Speed Bumps,Rubber Speed Humps
Renqiu Xingcheng Rubber Products Co., Ltd. , http://www.xingchengrubber.com