Home>Bearing knowledge>How to store bearings? |
How to store bearings?
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1. Only the relative humidity of the storage room does not exceed 60%; the temperature does not change much; the bearing can be stored in the original packaging for several years.
2, sealed bearings or bearings with dust cover; after a long time of storage; the smoothness of the smooth grease filled in the bearing may be reduced. The storage room should also be sensational and rocking.
3. Bearings not stored in the original packaging should be kept in good condition; avoid corrosion and pollution.
4, large rolling bearings can only be placed flat when placed; the side of the inner and outer ring is the best supported.
5. If it is an upright storage; because the inner and outer rings and the rolling parts are heavier; the inner and outer ring walls are relatively relatively.
Recommend to friends comments close window
Bearing related knowledge |
Introduction to large-sized motor bearing housings for automotive wheel bearings KOYO imported bearing progressive shaft support rigid skill bearing selection summary bearing professor teaches you how to pick and use bearings |
This article links to http://
Please indicate China Bearing Network http://
Previous:The correct application of the protection requirements of the sand making machine Next issue: How to deal with the noise of the Japanese NTN bearing during use
Derrick Hyperpool Shaker Screen
Replacement PWP Screens for Derrick Hyperpool Shakers
SJ-PWP DH Shaker Screen is designed for the replacement screen of Derrick Hyperpool shale shakers. There is an operating handle on one side of the screen and a triangle breach in the center of the opposite side. Thanks to he machine assembled backside seal rubber, even the strip appears a small broken part, the other parts will be steady on back panel still. The most obvious advantage of Hyperpool PWP screen is better resistant to oil. And mesh sizes are commonly available from API 40 to API 270.
Technical Parameter
- Material: stainless steel 304/316/316 L.
- Construction Type: PWP (perforated wear plate).
- Wear Mesh Shape: rectangle.
- API RP 13 C Designation: API 20 – API 325.
- Series: DX, DF, HP optional.
- Color: green.
- Package: 2 pcs per carton, 20 pcs/wooden case.
Adaptable Shale Shaker Model
SJ-Derrick Hyperpool PWP Shaker Screen are used as the substitute screen for
- Derrick Hyperpool 4-panel shaker.
- Derrick Triple Hyperpool shaker.
- Derrick Dual Hyperpool with mud cleaner.
- Derrick Hyperpool VE (Vapor Extraction)
Competitive Advantage
- Stainless steel 304/316 wire mesh for longevity.
- Increase shaker capacity and reduce mud loss.
- Scientific & reasonable cost control system for competitive price.
- Higher flow rates without sacrificing cut point integrity.
- API RP 13C (ISO 13501) compliant.
- Adequate inventory in the shortest time to meet customers' demand.

Remarks:
Derrick, Hyperpool, PWP, DX, DF, HP are marks of Derrick Corporation.
ShengJia only produces the replacement screens but not original from Derrick

Derrick Hyperpool Pwp Shaker Screen
Derrick Hyperpool Pwp Shaker Screen ,Derrick Hyperpool Shaker Screen,Derrick Hyperpool Shale Shaker Screen ,Derrick Hyperpool Pyramid Shaker Screen
Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com