Ceiling material technology and acceptance method Ceiling is a common post-decoration method on the ceiling of modern home decoration. The materials commonly used in it are mainly wood plywood, stone plaster board, decorative plasterboard, plastic gusset, aluminum gusset and plastic organic. Light-transmissive plate, etc. Flavor And Fragrance Intermediates Aluminum Chloride Particle,Flavor Intermediates Aluminium Chloride,Fragrance Intermediates,Aluminum Chloride Power Quzhou CanWin New Material Co., Ltd. , https://www.canwinnm.com
Ceiling craft
The general living rooms are decorated directly on the floor, so many decorative means of the wall are suitable for the ceiling. Some families have to make a ceiling in the living room in order to obtain the decorative effect and the atmosphere, or the top occupants in order to insulate, cool down, or to cover up the various shortcomings of the original roof. In order to prevent steam from invading the ceiling, the bathroom is conducive to heat preservation, concealing the upper and lower water pipes, and must be protected from moisture.
Ceiling acceptance method
1. The variety, specification, color, base structure and fixing method of the materials used in the ceiling project shall be in accordance with the design, the requirements of the household, and comply with the current standards.
2. The ceiling keel shall not be twisted or deformed. The installed ceiling keel shall be firm and reliable, and the allowable deviation of the surrounding level shall be ±5 mm.
3, light fixtures can be hung on the main keel, lamps or ceiling fans with a weight greater than 3kg should not be connected with the ceiling keel, and should be hooked.
4. The ceiling cover panel and the keel should be tightly connected, the surface should be flat, and there should be no defects such as pollution, cracking, ribs, corners, hammers, etc. The joints should be consistent, the bead should be straight and without warpage, the cover panel and the wall The junctions of curtains, curtain boxes, lamps, etc. should be strict.
5. The plasterboard of the paper is generally fixed on the keel with galvanized screws, and the nail head should be coated with anti-rust paint. The affixed cover shall not be delaminated, and the cover panel on which it is placed shall not be leaky, transparent or warped.
In short, the material technology of the ceiling determines the quality of the ceiling to a certain extent. In order to ensure that the ceiling is not easy to crack, deform and so on after installation in the home, it is recommended that the owners choose some high-quality ceiling materials for the process. Don't be tempted to be cheap.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Ceiling material process and acceptance method