How to maintain customized office furniture?

So how do you maintain wooden office furniture in the fall?
Avoid direct sunlight. Although the autumn sun is not as strong as the summer, the long-term sun exposure and the already dry climate, the wood is too dry, prone to cracks and local fading.
Cleaning solid wood Beijing office furniture custom, the main requirement is that the detergent is neutral, so as not to cause discoloration of wood. The household cleaning solid wood Beijing office furniture is customized, the most convenient cleaning agent is washing spirit. Close to neutral. If you are more careful, you can use a special cleaning agent for wood - natural soap wood cleaner.
After cleaning, if it is a family, there are two products to choose from. If it is carved wood, you can choose orange oil. If it is a wood without carving, you can choose natural wood wax. It is very convenient to use.
Soap cleaning method: Every once in a while, the wooden office furniture should be cleaned once. When washing, use a soft rag or sponge to scrub with warm soapy water. After drying, use the office furniture oil wax to wipe it. Luminous.
Milk cleaning method: Use a clean rag to dip in the expired milk or general edible milk, then use this rag to wipe the wooden office furniture such as the table, the effect is very good after removing the dirt. Finally wipe it with water. Suitable for a variety of office furniture.
Tea cleaning method: Painted office furniture is dusted, can be wiped with gauze wrapped wet tea leaves, or scrubbed with cold tea, which will make office furniture particularly smooth and bright.
White vinegar cleaning method: Mix the surface of the office furniture with the same amount of white vinegar and hot water, then rub it with a soft cloth. This Law applies to the custom maintenance of mahogany Beijing office furniture and the cleaning of office furniture after being contaminated by ink.
Beer cleaning method: Take 1400 ml of boiled light beer, add 14 grams of sugar and 28 grams of beeswax, mix thoroughly. When the mixture is cooled, wipe the wood with a soft pad, and then wipe with a soft dry cloth.
If the custom-made paint film of Beijing office furniture is burnt by cigarette butts, smoked or unburned matches, leaving the scorch marks, and the wood below the unburned paint film, you can pack a chopstick head with a small piece of fine-grained hard cloth. Lightly wipe the burning marks, then apply a thin layer of wax, the scorch marks can be removed.
This article consists of: http://organize and publish How to maintain 'customized office furniture?