Wanhua's first-class mechanical design process shale crusher


Wanhua series shale crusher high-efficiency fine crushing special equipment, also known as two-stage crusher, wet material crusher, shale according to different composition, some shale can be used to burn shale bricks, etc., crushed shale Can be used as brick plant additives, internal fuel, how to make reasonable use of these shale resources? Then we need to use our equipment - Wanhua shale crusher. Wanhua shale crusher is based on the original technology, and the designed shale crusher has good quality and excellent price. There is no screen bottom, the crushed high-humidity material will never be blocked, and the feed water content can reach 100%. The 90% of the fineness of the aqueous discharge is all within 2MM (below millimeters) and 1mm (below millimeters), accounting for 70%. It is dry and wet, and it is produced as usual on rainy days.

[Introduction to Shale Crusher Equipment:]

/ Suitable for crushing materials such as cinder, slag, slag, shale, coal gangue, construction waste, construction waste, etc. in brick and tile factory.
/ Two sets of rotors connected in series, so that the material crushed by the upper rotor is immediately shredded again by the hammer of the lower-stage rotor that rotates at a high speed, and the materials in the cavity collide with each other at a rapid speed and pulverize each other to achieve the effect of the hammer powder and the powder material. , direct discharge.
/Design adopts no screen mesh bottom, high humidity material, never blockage, there is no strict requirement on the moisture content of the material, there is no problem of blocking the sieve plate, and there is no problem that the fine powder can not be discharged in time and repeated crushing. The pulverization efficiency is high, and there is no ineffective wear of the hammer.
/The machine has a high alloy wear hammer. The hammer hammer handle is used in combination. The double-rotor with no sieve bottom pulverizer is used in series, the two-stage two-stage pulverization, the output is large, the discharge particle size is below 3mm, and the below 2mm accounts for more than 80%.
/The machine can be easily opened and closed with only one person. It is not only light, fast, safe and reliable, saving time and effort, and is easy to maintain.

Customers are our forever partners, respecting customers, understanding customers, and continuously providing services that exceed customer expectations are our philosophy of advocating and persisting!

Our main products: shale crusher Cinder crusher network: http://
Company Name: Gongyi Wanhua Machinery Manufacturing Co., Ltd. Contact Phone Contact Mobile
'Wanhua first-class mechanical design process shale crusher