Dust bag cage stainless steel skeleton maintenance

The following article about "Cement factory kiln dust collector 125*6000 stainless steel dust bag cage cage maintenance" article by Botou City Chunhui Environmental Protection Equipment Co., Ltd., will not be reproduced, if you want to know more about the type of dust collector, you can call our professional The manager of the person's phone is consulting, qq 3406358895. We have many years of experience in the selection of precipitator equipment, and will design, produce, install, and after-sales professional solutions based on your operating conditions.
The 125*6000 stainless steel filter bag cage frame is the most basic dust remover accessory for the cement plant kiln tail dust remover. Careful careful cleanup is required. This can extend the service life of the frame. But how to remove dust from the dust collector frame more quickly and safely? Here are some ways to introduce:
1. When the dust collector skeleton is cold milled during the cold season, try to avoid the excessive moisture in the temperature rising period. It is necessary to pay attention to the control of the feeding speed. The circle flow mill can increase the amount of back powder to increase the wind temperature inside the mill. It may be appropriate to extend the material stop time, early stop the mixture of high moisture content, after the grinding mill to properly extend the mill exhaust time, while doing a good job in the transfer of the grinding body.
2. Always check the opening and closing of the air path inside the bag filter to control the sweeping wind.
3. Check the degree of clogging of the filter bag and find that it is slightly clogged.
4, to ensure that the ventilation capacity to maintain normal, to avoid blockage continues to operate to form a vicious circle.
5. Regularly inspect the air leakage of the exhaust gas treatment system and implement complete plugging.
6. Make the necessary external insulation for the exhaust gas exhaust system to avoid evaporation of the moisture on the filter bag.
7. The dust from the dust collector skeleton is collected in the dust of the ash hopper. It can be discharged automatically or manually, but it must be discharged in the order specified.

Pvc Flooring

Commercial Vinyl Flooring,Pvc Flooring,Hospital Pvc Flooring,Non-Directional Pvc Flooring

JIANGSU HUAJING FLOOR TECHNOLOGY CO.,LTD , https://www.huajing-floor.com