Stainless steel gear pump products include

Stainless steel gear pump series products include F type, WRF type, FXA, FXB series products. Our factory is a professional manufacturer of stainless steel gear pump series stainless steel " target=_blank> stainless steel gear pump series products including F type, WRF type, FXA FXB series products, our factory is a professional manufacturer of stainless steel "target=_blank> stainless steel gear pump series. The consumption of F-type pump has the characteristics of compact structure, firm performance and beautiful appearance. It is suitable for conveying corrosive or A liquid with high hygienic conditions, a temperature not higher than 200 ° C, a viscosity of 5-1500 cst, such as various chemical raw materials such as acid and alkali, and food.
Stainless steel "target=_blank> stainless steel gear pump hydraulic system consists of fuel tank, stainless steel "target=_blank> stainless steel gear pump, pipeline, control valve and hydraulic cylinder and other important components. When the hydraulic system is working, since the internal oil passages of various control valves are cast-formed, the sand adhered to the inside and the like are scattered due to the action of the pressure oil and other elements, and the hydraulic system is contaminated. At the same time, the fuel tank and pipeline welding slag, the internal flashing of the hydraulic cylinder, and burrs are also the factors that cause the hydraulic system to be contaminated. After the stainless steel "target=_blank> stainless steel gear pump hydraulic system is contaminated, the friction between the friction pairs of the gear pump is intensified, and the sealing effect is effective, so that the gear pump oil seal is broken down and the oil is broken. Therefore, the valve body sand should be carefully stopped. Disposal of fuel tanks and hydraulic accessories and hydraulic cylinder cleaning to ensure the cleanliness of the hydraulic system. http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com. Cn

Epoxidized Soybean Oil (ESO) Super-Plzer- ESO



ESO is finely produced from high quality natural raw materials and has passed the toxicity tests of Disease Control Center, Shanghai Food and Drug Administration and SGS.It is soluble in hydrocarbon compounds, ketones, esters, higher gradealcohols and other organic solvents, slightly soluble in ethanol as well.It is the most widely used PVC nontoxic plasticizer and stabilizer. It is particularly consistent with PVC and has low volatility and mobility. Its high thermal stability,light stability and good resistance to water and oil endow the products with better mechanical strength, weather resisting property and electrical property. Its non-toxicity makes it the internationally acknowledged chemical aid for foodstuff wrapper. It can be applied to all PVC products, such as, foodstuff wrapper,medical ware, pellicle, sheet material, tubular goods, sealing plate of icebox,artificial leather, floor leather, wire and cablematerial, plastic wallpaper and other daily use plastic products. It can also be applied to making special printing ink, oil paint, coating material, synthetic rubber, and liquid compound stabilizer and so on.

Epoxidized Soybean Oil (ESO)

Epoxy Fatty Acids Methyl Ester (EFAME) Super-Plzer- EFAME




Molecular Formula : C19H36O3


CAS NO.: 72480-50-3


Non-toxic and environment friendly PVC Plasticizer as secondary,light yellow vicious oily liquid and odorless at normal temperature,successively processing methyl ester which is made from natural soybean oil for esterification and oxidation.Compared with ESBO,it is not only can completely or partially substitute the main plasticizer like DOP/DBP/DINP...etc.Significantly improve the physical property of the products like softer,lightfastness and heat-prof ability;extending the aging;good synergy;better lubricant,compatibility and dispersion property,can be used as surfactants and dispersing agents used in epoxy coatings and the epoxy resin production,can successfully pass the tests of SGS 16P and REACH 84 in accordance with EU ROHS and USA FDA.

Epoxy Fatty Acids Methyl Ester  (EFAME)

Compounded Epoxy Biologic Ester Super-Plzer -CEBE




CAS NO.:8013-07-8



The compounded epoxy biologic ester is a new Eco-Friendly Plasticizer that our company concentrated to develop, looks light yellow and smells some plant oil flavor under normal temperature. it can efficiently substitute DOP;DBP;ATBC or other main plasticizer over 40% with the same result, but the price is under 68% of DOP. compared to EFAME,Its flash point is higher and freezing temperature is lower. Using it can increase the ability of heat-proof and lightfastness of the products, and it can make the products shining and touch feeling very good. Don`t need to add ESO if using it, can cut down a lot of cost with improving the quality for the user. surely it can pass SGS 16P and REACH84 test ,accord with EU ROHS statement and FDA rules.

Compounded Epoxy Biologic Ester







Eco-Friendly Plasticizer

Epoxidized Soybean Oil, Epoxy Fatty Acids Methyl Ester, Environmentally Friendly Plasticizers, Eco-Friendly Plasticizer

Shandong Novista Chemicals Co.,Ltd (Novista Group) , https://www.novistachem.com