Ceramic sanitary ware products mainly include toilets, squatting wares, urinals, wash basins, washing tanks, mop pools, etc. The main maintenance is the toilet bowl, others are relatively simple, as long as the porcelain is well maintained. . After using the washbasin for a long time, oil stains and dirt can easily accumulate. At this time, the surface of the basin can be washed with oxalic acid. After a minute, it is rinsed with water, and the wash basin becomes bright. This is because the acidity of oxalic acid is extremely high, and it is quite effective to remove oil stains. However, it is important to use oxalic acid as soon as possible to clean the surface with water so as not to be corroded by acidic substances. If you can't improve, you can buy bottled safety bleach and pour it into the stained area of ​​the washbasin. After soaking for 20 minutes, wash it with a towel or sponge, then wash it with water, but never use scouring pad or sand. Gently rub the surface as this will grind the surface of the washbasin and make it tarnish. The above method of washing basins can also be applied to other ceramic sanitary wares. In addition, in order to protect ceramic sanitary ware, the following points should also be noted: Do not rush into the toilet into news items such as newsprint, paper pad, and sanitary napkins; To prevent breakage and water leakage, do not hit the ceramic; Please use a skin aspirator to remove it immediately. Cannot be used and stored in water below 0 ° C; In order to prevent the expansion of the cement and cause the bottom of the toilet to burst, it must be installed with glass glue; If your sewerage already has a backwater bend, it is recommended that you use a flushing product and prohibit the use of siphonic products; When installing the squatting pan, it is recommended to separate the product mounting surface from the floor with a thin layer of asphalt; When installing the basin, it is recommended to use glass glue. It is forbidden to use epoxy. If there is a metal scratch, it can be washed away by a chemical reaction with a dilute acid without damaging the glaze. When the toilet is installed, if the floor is too thin, it is recommended that it can be fixed directly with silicone without using expansion bolts. If you choose a cabinet basin, especially a hanging cabinet basin, it is recommended that you do not directly fix the cabinet. It is safer to fix the cabinet together with the ceramic washer. At present, many users use the domestic water to flush the toilet. The sewage for washing clothes is alkaline. When the toilet tank is used, it is easy to damage the water. The oily water is also easy to corrode the accessories to make the porcelain stain. Therefore, it is recommended not to use dirty water. Flush the toilet with the water washed by the tableware, but it does not matter if it is poured directly into the toilet without passing through the water tank.
TORICH is focusing on Honed Tube manufacturing and exporting,
ID Honed Tube is produced by cold drawing on stainless steel or carbon steel over a mandrel,
seamless honed tube where the surface is honed or skiving roller burnish, and the tubes are stress relieved and annealed if it is necessary.
The Steel Tubes are produced according to technical standard of
EN10305-1 Cold Drawn Seamless Steeel Tubes
EN10305-2 Cold Drawn Welded Precision Steel Tubes
Seamless and Welded DOM tubing are produced by material of E155,E195,E235,E275,E355 +C +LC +SR +A +N
DOM is a process that is applied to tubing after it is initially constructed.
It is referred to as Seamless ,It can be said that do seamless process method on ERW tubes,
So the tubes will have a high strength ,high quality.
DOM tubing is commonly use in auto parts and machinery parts, also for heavy engineering industry.
Big Diameter Honed Tube, Skiving Roller Burnished Tube, max ID 650mm, max length 12000mm
Production facility for ID Honed and Skiving Roller Burnished Steel Tube
ERW mother tube for Honed Tube
Seamless Steel Tubes in Cold Drawn Production for ID Skiving Roller Burnish Production:
Stainless Steel Pipe ready for ID Honing
Honed Finish ID for Stainless Steel Pipe:
Honed Tube Honed Tube,High Precision Honed Tube,Honing Hydraulic Cylinder Tube,Carbon Steel Honed Tube Torich International Co.,Ltd--The Steel Tube Maker , http://www.chinasteeltubepipe.com
Ceramic sanitary ware maintenance oxalic acid should be used with caution