How to clean and maintain the shoe cabinet?

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

In the customary furniture has become a fashion today, the shoe cabinet has gradually become a member of the custom furniture, no longer simply buy a shoe rack, a variety of personalized and practical shoe cabinets began to enter each fashion-loving family However, the shoe cabinet is also a big dead corner in the home, so how to clean and maintain the shoe cabinet?

â—†Shoe cabinet cleaning

1. Regular maintenance of the shoe cabinet, generally can be carefully maintained once every quarter. After wiping the surface dust of the furniture with a soft cloth, the furniture wax is evenly coated on the furniture surface. The light wax protects the furniture paint film from moisture and scratches. And burns.

2. For stains that have been left for too long or difficult to remove, use a cotton cloth with a small amount of gasoline or alcohol to remove them. Then use a piece of cotton cloth to spread the appropriate amount of glazing wax and then wipe the wax evenly with a piece of dry cloth to avoid wax marks. Then treat the area where the paint layer has been damaged.

3. The part that is scorched by cigarettes, such as only the surface paint layer, can be lightly rubbed off the stain with fine water sandpaper, and then waxed.

4, the surface is scratched and not deep and wood, glazing wax can be used for local direct polishing, sandpaper should be used for deeper scratches.

5, if the damage has been deep into the wood, it should be polished and repainted to make the furniture surface bright and lasting, moisture-proof.

6, furniture hardware accessories metal handle can also be glazed with glazing wax and wipe, so that it is flexible to rotate and rust and anti-oxidation.

â—†Shoe cabinet maintenance

1. Use a clean soft cloth, often wipe the surface of the shoe cabinet, do not use ordinary water, wet cloth, hard cloth to wipe the surface, mirror and glass; avoid contact with acid, alkali and grease substances, under the conditions permit, high Purity industrial alcohol wipes the board surface.

2. It is not possible to hit the surface of the shoe cabinet with hard objects such as hammers. It is even more difficult to use the knife to cut and cut on the board surface. If it is found that the panel has partial seams, it should be repaired in time. Otherwise, the crack will open even after a long time. A curved shape appears, causing complete damage.

3. Use a special cleaning agent to clean the stains on the mirror or glass surface of the shoe.