CANADA STANDARD PVC Coated Metal Temporary Security Fencing For Backyard / Temporary Fence Barricade
Â
Â
Temporary Fencing  Material:
Â
•Low carbon steel wire
•Electro galvanized wire
•Hot-dipped galvanized wire
Â
Temporary Fencing Specification:
Â
| Height | 1800mm. 1900mm. 2000mm .2100mm .2200mm .2300mm |
| Length | 2100mm .2200mm .2300mm .2400mm. 2500mm. 3000mm |
| Frame | OD32. DO38. OD40. OD42 .OD48. OD50 .X 2.0mm thickness |
| Infill Mesh | 50X50. 60X60. 75X75. 50X150. 60X150 .75X150 |
| Diameter | 3.5mm 4.0mm 4.5mm 5.0mm |
| Finish |
Hot Dipped Galvanized Zinc Thickness 42 Microns PVC coated |
Â
| Â Product Name | Temporary fence |
| Wire Diameter | 3mm, 4mm, 5mm |
| Frame Size | 25x25mm, 30x30mm |
| Bottom Slab Size | 860x90x7mm |
| Plastic Feet Filled Concrete | 550x230x130mm |
| Mesh | 60x150mm, 75x100mm, 70x100mm |
| Type | Canada Temporary fence, Australia Temporary fence |
| Characteristics | (1)It is easy to work,bright color, easy to maintain. (2)Difficult to corrosion, long life expectancy. (3)uniform mesh, flat surface, high quality. |
| Packing | 1 Packed with plastic film then on the pallets 2. Nude packing 3.Other special package according to customers' requirements. |
Â
Â
Application
Â
This kind of fence has a superior structure, the globality, mobility and environmental suitability is very good .tamporary fence is easy transport, dismantle easily, low cost . It has the advantage of one cost, many times used.
1. Temporary fence is used where building a permanent fence is either impractical or unneeded.
2. Temporary fencing is used when an area needs barriers for the purposes of public safety or security,crowd control, theft deterrent, or equipment storage.
3. Temporary fencing is also often seen at special outdoor events, parking lots, and emergency or disaster relief sites.
4. It's most common use is as construction hoarding for security fencing around building sites.
5. Other uses for temporary fencing include venue division at large events and public restriction on industrial construction sites.
General Purpose Powder-Actuated Systems
General Purpose Powder-Actuated System is used for building fastening, which have three parts: Actuated tools, Cartridges and fasteners. When Actuated tool strikes cartridge and cartridge will explode in the inner of tools and produce a lot of high temperature and high pressure gas. The gas will push the piston and the piston will push the fasteners into the basement. Or the gas will push the fasteners directly into the basement. Like this, we can fix a lot of things into concrete and steel basement tightly.
The fundamental is as the following:
The Actuated tools are classified for direct tools and undirect tools, we can also called high velocity and Low velocity tool, the fundamental is as the following:
High velocity tool:
Low velocity tool:
Based on different purpose, Cartridges are classified for different calibers and dimensions. The usual caliber and dimension is as the following:
.27calX11mm(S1)
.22calx15mm(S5)
.22calx16mm(S52)
.27calx18mm(S3)
.25calX16mm(S43)
At the same time, each caliber cartridge is classified for different specification based on the quantity of inner powder, which is marked by different color. when the color is more darker, the power level is stronger. otherwise, the power lever is lighter.
The fasteners are classified for different categories. Each different category is classified for different specification based on different length and diameter. At the same time, it is can also be re-designed based on special use.
The packages are as the following:
1. Tools: one tool/ plastic box/carton or five boxes/carton
2.Cartridge: 100pcs/paper or plastic box, 100boxes/carton.
3. Fasteners: 100pcs/paper box, XX boxes/carton.
For shipment, all cartons will packed by pallet.
General Purpose Powder-Actuated Systems,Powder-Actuated Systems,Powder Actuated Fasteners,Powder Actu
YIBIN CITY NANXI DISTRICT QIANGXIN PLASTIC CO.,LTD. , https://www.homsetfastening.com